This is an old revision of the document!

Using a Raspberry Pi to Run a Talon SRX Motor Controller

Configure RPi as a CAN Bus controller

apt-get install libsocketcan2
apt-get install libsocketcan-doc
wget http://www.ctr-electronics.com//downloads/lib/CTRE_Phoenix_FRC_Linux_5.12.0.zip
unzip CTRE_Phoenix_FRC_Linux_5.12.0.zip
unzip -d /usr/local/include/ core-5.12.0-headers.zip
unzip -d /usr/local/include/ api-cpp-5.12.0-headers.zip
unzip -d /usr/local/include/ wpiapi-cpp-5.12.0-headers.zip